Fluid Loss Reducer

Nitrile Silicone Polymer SO-1

Nitrile silicone polymer is composed of vinyl monomers and silane coupling agent by moderate crosslinking polymerization with free radical. It can be used in ultra-deep wells and soluble in fresh water, saltwater, saturated saltwater and seawater drilling fluids, and can be directly added to various water-base drilling fluids.

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

Inquire Now

Like this page? Share it with your friends!

Description

Description

Nitrile silicone polymer is composed of vinyl monomers and silane coupling agent by moderate crosslinking polymerization with free radical. Due to the introduction of sulfonic acid, nitrile, silicon and other high temperature resistance groups in the molecular chain, which give the product excellent salt resistance up to saturation and anti-high temperature up to 220 ℃. It can be used in ultra-deep wells and soluble in fresh water, saltwater, saturated saltwater and seawater drilling fluids, and can be directly added to various water-base drilling fluids. 

The recommend dosage is 3 - 7 ppb.


Specification

Items

Specifications

Appearance

White free-flowing powder

Moisture, %

≤10.0

Residue (0.90mm), %

≤10.0

FLAPI for freshwater mud (180℃/16h), mL

≤12.0

FLAPI for saturated saltwater mud (180℃/16h), mL

≤15.0

 

Application & Advantages

Application
It can be used in ultra-deep wells and soluble in fresh water, saltwater, saturated saltwater and seawater drilling fluids, and can be directly added to various water-base drilling fluids. The recommend dosage is 3 - 7 ppb.


Advantages

  • Good capability to reduce filtration loss under high temperature with low dosage.

  • Resist salt to saturation, good calcium and magnesium resistance, can be used for freshwater, saltwater, saturated saltwater and seawater drilling fluids.

  • Excellent high temperature resistance (up to 220 ℃), can be used for deep, ultra-deep and geothermal wells.




Package

Package and Storage
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.

Safety

They shall be avoided contact with eyes, skins and clothes, otherwise flush it with water. Handling methods and dangerous data shall be referred to MSDS.


Inquire

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

*Required.

+86-532-68872006