Oceancel PAC-L is a premium grade purified low viscosity, water soluble ploymer, designed to control fluid loss while causes minimal increase in viscosity in water-based drilling fluids. PAC-LV-ISO meets all the performance requirements of PAC-LV in API 13A ,17 section.
Oceancel PAC-L is a premium grade purified low viscosity, water soluble ploymer, designed to control fluid loss while causes minimal increase in viscosity in water-based drilling fluids. PAC-LV-ISO meets all the performance requirements of PAC-LV in API 13A ,17 section.
Specifications
Bulk density: | 0.64 – 0.88g/cm3 |
Degree of Substitution: | 0.9 min |
Moisture content: | 10% max. |
Purity: Min. | 95% |
Particle size: | Not bigger than 0.8mm (20 mesh) |
Appearance: | off-white, free-flowing powder |
Presence of starch products: | absent |
Apparent Viscosity, cps | 40 max. |
API Filtrate Volume, ml | 16 max. |
Similar Product
MI SWACO | BARIOD | AMC | BAKER | CETCO |
PLATINUM PAC UL PAC UL | QUICK TROL LV | EZEE PAC L | MIL-PAC LV | REL-PAC XTRA-LOW |
Application/Function
Very effective filtration controller in non-dispersed systems
Minimal viscosity contribution
Resistant to micro-bacterial attack without biocides
Applicable over a wide range of fluid types
Contributes to shale stabilization
Advantages
Effective in fresh water, salt water, and brine-based fluids
Controls fluid loss
Inhibits hydratable, swelling shale
Environmentally compatible
Does not require a bactericide
Packaging:
Oceancel PAC-LV was packaged in 25kg multi-wall paper sacks. The product is moisture absorbent, thus to protect from damp and moist for conservation. it should be stored in dry and ventilate store house and not to be exposed to air and sunshine.
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with water. Handling methods and dangerous data shall be referred to MSDS.
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
*Required.