OCEANVIEW GROUP INC.
You one stop drilling chemicals source
You one stop drilling chemicals source
Polyether Polyol Lubricant is fluorescence -free, non-toxic and non-pollution. So it can be used as an agent to build reservoir and environment protection drilling fluids. It can be directly added into various water-based drilling fluids.
Polyether Polyol Lubricant made from ethylene oxide, propylene oxide and nonionic surfactant through special refining and emulsifying process, which can provide reasonable lubricanting property. Polyether Polyol Lubricant is fluorescence -free, non-toxic and non-pollution. So it can be used as an agent to build reservoir and environment protection drilling fluids. It can be directly added into various water-based drilling fluids.
Items | Specifications |
Appearance | Milky viscous liquid |
Water soluble | Not tiered |
Density, g/cm3 | 0.95±0.10 |
Fluorescence grade | ≤5.0 |
Reduced rate of friction factor, % | ≥85.0 |
Advantage
1. Good lubricity which is equal to oil base lubricant, helps to use in directional and horizontal wells.
2.R easonable salt, calcium and magnesium resistance, can be applied in freshwater, saltwater; saturated saltwater and seawater drilling fluids.
3. Perform well up to 150℃, can be applied in deep wells.
4. Non-toxic and biodegradable, no harm to environment.
Package and Storage
It is a liquid packaged in 25 L, 50 L cans and 200 L drums. International packaging may vary. And they shall be stored in a shady and dry place with good ventilation.
Safety
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with water. Handling methods and dangerous data shall be referred to MSDS.
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
＊Required.
© 2017 Qingdao Oceanview Chemical Inc. All Rights Reserved.
Powered by HiCheng
