Alkaline Control

Soda Ash

Soda ash is inexpensive and used as an economical method for removing soluble calcium.

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

Inquire Now

Like this page? Share it with your friends!

Description

Description
Soda Ash (Na2CO3) is the common name for sodium carbonate, is inexpensive and used as an economical method for removing soluble calcium. Magnesium is similarly precipitated as insoluble magnesium carbonate; however, a more effective treatment for magnesium hardness is caustic soda, which precipitates magnesium hydroxide.


Specification

Technical Data

Appearance

White powder

Bulk density

0.9 g/cm3 Min

Purity

99.0% Min

 

Application & Advantages

Application/Function
Soda Ash is used to precipitate Calcium in make-up water or while drilling anhydrite stringers.
Provided the saturation level of the Calcium salt has not been exceeded, the amount of Soda Ash required to treat out the calcium can be approximated by 350 mg/L Calcium ions requires 1.0 kg/m³ of Soda Ash.
Soda Ash effectively and economically removes Calcium from anhydrite by precipitation as Calcium Carbonate. Over-treatment with Soda Ash can result in a Carbonate alkalinity and as consequent, excessive gel strength.


Advantages‍
Widely available and economical source of carbonate ions to precipitate calcium while increase pH
Concentrate chemical:effectively removes calcium in most drilling fluids at small dosage
Effective flocculants for spud mud

 

Package

Recommended Treatment
Add Soda Ash in concentration of 0.4-1.2 lb/bbl (1.0-3.0 kg/m³) to any system. Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.

‍Environmental Information‍
For information concerning environmental regulations applicable to Soda Ash, contact the Health Safety and Environmental Department.

Shipping
Transportation of commodity name is not restricted by either international or CHINA regulatory agencies.

‍Safe Handling Recommendations‍
Utilize normal precautions for employee protection when handling chemical products. Use of standard PPE is recommended for employee comfort and safety. See Material Safety Data Sheet (MSDS) prior to use.

‍Package and Storage‍
Packaged in 25kg plastic woven bag, 50kg/500kg/1000kg flexible freight bag, or upon clients' demand.
Avoid high-intensity extreme pressure and prolonged exposure to strong sunlight. Keep container closed. Keep away from heat, sparks and flames.


Inquire

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

*Required.

+86-532-68872006